View 4051-S16-R_750956.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

UNISONIC TECHNOLOGIES CO., LTD 4051
8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS
SOP-16
CMOS IC
DESCRIPTION
UTC 4051 is single 8-channel analog multiplexers/demultiplexers for application as digitally-controlled analog switches. The device has three binary control inputs and an inhibit input. It feature low ON impedance and very low OFF leakage current. Control of analog signals up to the complete supply voltage range can be achieved.
DIP-16
FEATURES
* Wide Analog Voltage Range: VDD-VEE = 3V~18V. (Note: VEE must be VSS) * Break-Before-Make Switching Eliminates Channel Overlap. * Linearized Transfer Characteristics * Implement an SP8T solid state switch effectively. * Pin-to-Pin Replacement for CD4051
TSSOP-16
*Pb-free plating product number: 4051L
ORDERING INFORMATION
Order Number Normal Lead Free Plating 4051-S16-R 4051L-S16-R 4051-S16-T 4051L-S16-T 4051-P16-R 4051L-P16-R 4051-P16-T 4051L-P16-T 4051-D16-T 4051L-D16-T Package SOP-16 SOP-16 TSSOP-16 TSSOP-16 DIP-16 Packing Tape Reel Tube Tape Reel Tube Tube
www.unisonic.com.tw Copyright (c) 2005 Unisonic Technologies Co., LTD
1 of 6
QW-R502-054,A
4051
PIN CONFIGURATION
X4 X6 X X7 X5 INH VEE VSS 1 2 3 4 5 6 7 8 UTC 4051 16 VDD 15 X2 14 X1 13 X0 12 X3 11 A 10 B 9C
CMOS IC
PIN DESCRIPTION
PIN No. 3 6 7 8 11,10,9 13,14,15,12,1,5,2,4 16 SYMBAL X INH VEE VSS A,B,C X0~X7 VDD NAME AND FUNCTION Common Input/Output Inhibit Inputs Supply Voltage Ground Binary Control Inputs Independent Inputs/Outputs Positive Supply Voltage
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 6
QW-R502-054,A
4051
ABSOLUTE MAXIMUM RATING
PARAMETER DC Supply Voltage (Referenced to VEE, VSS VEE) SYMBOL VDD RATINGS -0.5 ~ +18
CMOS IC
UNIT V
Input or Output Voltage (DC or Transient) VIN, VOUT -0.5 ~ VDD +0.5 V (Referenced to VSS for Control Inputs and VEE for Switch I/O) Input Current (DC or Transient), per Control Pin IIN 10 mA Switch Through Current ISW 25 mA 500 mW Power Dissipation PD mW/ Derating above 65 7 Junction Temperature TJ 125 Operating Temperature Range TOPR -40 ~ +125 Storage Temperature Range TSTG -40 ~ +150 Note: 1.Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2.The device is guaranteed to meet performance specification within 0 ~70 operating temperature range and assured by design from -40 ~125 .
ELECTRICAL CHARACTERISTICS (Ta=25 , unless otherwise specified.)
PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX SUPPLY REQUIREMENTS (Voltages Referenced to VEE) VDD - 3.0 VSS VEE 3 18 Power Supply Voltage Range VDD VDD=5V 0.005 5 Control Inputs: VIN = VSS or VDD Quiescent Current per Switch I/O: VEE VI/O VDD, IQ VDD=10V 0.010 10 Package and Vsw 500mV(Note 2) VDD=15V 0.015 20 Ta=25 only (The channel VDD=5V (0.07 A/kHz) f + IQ Total Supply Current (Dynamic Plus Quiescent, VDD=10V ID(AV) component, (VIN-Vout)/Ron, is (0.20 A/kHz) f + IQ not included.) Per Package) (0.36 A/kHz) f + IQ VDD=15V SWITCHES IN/OUT AND COMMONS OUT/IN -- X, Y, Z (Voltages Referenced to VEE) Recommended Peak-to-Peak VI/O Channel On or Off 0 VDD Voltage Into or Out of the Switch Recommended Static or Dynamic Vsw Channel On 0 600 Voltage Across the Switch Output Offset Voltage VO(OFF) VIN = 0V, No Load 10 Vsw 500mV VDD=5V 250 1050 ON Resistance VIN = VIL or VIH (Control), and RON VDD=10V 120 500 VIN = 0 to VDD (Switch) VDD=15V 80 280 ON Resistance Between VDD=5V 25 70 Any Two Channels in the RON VDD=10V 10 50 Same Package 10 45 VDD=15V VIN = VIL or VIH (Control) 0.05 100 Channel to Channel or Any Off-Channel Leakage Current IOFF One Channel, VDD=15V Capacitance, Switch I/O CI/O Inhibit = VDD 10 Capacitance, Common O/I CO/I Inhibit = VDD 17 Pins Not Adjacent 0.15 Capacitance, Feedthrough CI/O Pins Adjacent 0.47 (Channel Off) UNIT V A
A
VPP mV V
nA pF pF pF
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 6
QW-R502-054,A
4051
ELECTRICAL CHARACTERISTICS(Cont.)
PARAMETER SYMBOL TEST CONDITIONS CONTROL INPUTS - INHIBIT A, B, C (Voltages Referenced to VSS) VDD=5V Low Level Input Voltage VIL RON= per spec, IOFF = per spec VDD=10V VDD=15V VDD=5V High Level Input Voltage VIH RON= per spec, IOFF = per spec VDD=10V VDD=15V Input Leakage Current ILEAK VIN= 0 or VDD, VDD=15V Input Capacitance CIN MIN TYP 2.25 4.50 4.0 2.75 5.5 8.25 0.00001 5.0
CMOS IC
MAX 1.5 3.0
UNIT
V
6.75 3.5 7 11
V 0.1 7.5 A pF
DYNAMIC ELECTRICAL CHARACTERISTICS
(CL = 50pF, Ta=25 , VEE PARAMETER Propagation Delay Times Switch Input to Switch Output (RL = 10 k) Inhibit to Output VSS, unless otherwise specified) SYMBOL tPLH, tPHL tPHZ, tPLZ tPZH, tPZL tPLH, tPHL THD VDD-VEE Vdc 5 10 15 5 10 15 5 10 15 10 TEST CONDITIONS tPLH, tPHL =(0.17 ns/pF)CL + 26.5ns tPLH, tPHL =(0.08 ns/pF)CL + 11ns tPLH, tPHL =(0.06 ns/pF)CL + 9ns (RL=10k, VEE=VSS) Output "1" or "0" to High Impedance, or High Impedance to "1" or "0" Level RL = 10 k, VEE = VSS MIN TYP 35 15 12 350 170 140 360 160 120 0.07 MAX 90 40 30 700 340 280 720 320 240 UNIT ns
ns
Control Input to Output Total Harmonic Distortion
ns
RL = 10K, f = 1 kHz, Vin = 5 VPP % RL = 1k, VIN = 1/2 (VDD-VEE) p-p, Bandwidth BW 10 17 MHz CL = 50pF, 20 Log (Vout/Vin) = -3dB) RL=1K, VIN = 1/2 (VDD-VEE) p-p Off Channel Feedthrough 10 -50 dB Attenuation fIN = 4.5 MHz RL = 1k, VIN = 1/2 (VDD-VEE) p-p Channel Separation 10 -50 dB fIN = 3MHz Crosstalk, Control Input to R1 = 1k, RL = 10k Control 10 75 mV Common O/I tTLH = tTHL = 20ns, Inhibit = VSS Note 1. Data of "TYP" is intended as an indication of the IC's potential performance. 2. For voltage drops across the switch(Vsw)>600mV (>300mV at high temperature), excessive VDD current may be drawn, i.e. the current out of the switch may contain both VDD and switch input components. The reliability of the device will be unaffected unless the Maximum Ratings are exceeded.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 6
QW-R502-054,A
4051
TEST CIRCUIT
CMOS IC
VDD IN/OUT
VDD
VDD OUT/IN
VEE
VDD LEVEL CONVERTED CONTROL
IN/OUT
OUT/IN
VEE
CONTROL
Switch Circuit Schematic
TRUTH TABLE
16 VDD BINARY TO 1 - OF - 8 DECODER WITH INHIBIT
Control Inputs INHIBIT C B 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 x
A 0 1 0 1 0 1 0 1 x
ON Switches X0 X1 X2 X3 X4 X5 X6 X7 None
INH 6 A 11 B 10 C9
LEVEL CONVERTER 8 VSS 7 VEE
X0 13 X1 14 X2 15 X3 12 X4 1 X5 5 X6 2 X7 4
3X
1 x x = Don't Care
UTC 4051 Functional Diagram
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 6
QW-R502-054,A
4051
TYPICAL CHARACTERISTICS
350 VDD = 7.5 V 300 VEE = - 7.5 V
Ta =25
CMOS IC
350
VDD = 5.0 V 300 VEE = -5.0 V
Ta =25
"ON" Resistance, RON
200 150 100 50 0 -10 -8.0 -6.0 -4.0 -2.0 0 2.0 4.0 6.0 8.0 10
"ON" Resistance, RON
250
250 200 150 100 50 0 -10 -8.0 -6.0 -4.0 -2.0 0 2.0 4.0 6.0 8.0 10
Input Voltage , VIN (V)
350 "ON" Resistance, RON ( )
Input Voltage , VIN (V )
VDD = 2.5 V 300 VEE = - 2.5 V
Ta =25
250 200 150 100 50 0 -10 -8.0 -6.0 -4.0 -2.0 0 2.0 4.0 6.0 8.0 10
Input Voltage , VIN (V )
UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
6 of 6
QW-R502-054,A

▲Up To Search▲

Price & Availability of 4051-S16-R

	To Download 4051-S16-R Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .